Wiki Custom Orthotic Coding Assistance

Create Wiki Sort by votes
A

amieras

New
Messages
4
Location
Grand Rapids, MI
Best answers
0
Hi All,

I am hoping to get some advice on what HCPCS and CPT are appropriate to bill for casting/ordering/fitting a custom orthotic. We currently bill L3000 and cast via a digital image. Is there an appropriate casting code that is allowed for this method?
 
0
Hello there!
We bill 29799 bilateral for the casting whether it is manual or digital. Not all payers cover it, but many do. Then at the time of dispense, bill out the L3000 RT, L3000 LT. With the exception of Medicare, which does not cover custom orthotics.
 
0
@podcoder70 Do you have any knowledge of an ICD-10 code that can be used when billing bilateral orthotics but the provider is only treating one side? I have a provider who pretty consistently likes to bill bilateral orthotics out with only a right or a left DX code. I am told by the provider that they are only treating the one side and that there is not DX code for the other. We have attempted to appeal with payers but they usually are upholding their denials due to invalid DX.
 
0
Amberjo87 said:
@podcoder70 Do you have any knowledge of an ICD-10 code that can be used when billing bilateral orthotics but the provider is only treating one side? I have a provider who pretty consistently likes to bill bilateral orthotics out with only a right or a left DX code. I am told by the provider that they are only treating the one side and that there is not DX code for the other. We have attempted to appeal with payers but they usually are upholding their denials due to invalid DX.
Click to expand...
Unfortunately, there is no ICD10 code specific to this situation. Coverage for orthotics depends on the payer. For example, Medicare and Medicare Advantage plans do not cover them, neither does UHC, Aetna has limited coverage for very specific diagnoses, and Cigna is a big question mark. Blue Shield and Anthem are plan-specific. The assumption of coverage is for bilateral as it would be inappropriate to dispense unilaterally as it would throw off the patient gate and cause new medical issues. An appeal needs to be sent with a letter of medical necessity explaining why the patient requires bilateral, you have to educate the payer on why their denial is wrong. For the denials you received, who was the payer?
 
0
podcoder70 said:
Unfortunately, there is no ICD10 code specific to this situation. Coverage for orthotics depends on the payer. For example, Medicare and Medicare Advantage plans do not cover them, neither does UHC, Aetna has limited coverage for very specific diagnoses, and Cigna is a big question mark. Blue Shield and Anthem are plan-specific. The assumption of coverage is for bilateral as it would be inappropriate to dispense unilaterally as it would throw off the patient gate and cause new medical issues. An appeal needs to be sent with a letter of medical necessity explaining why the patient requires bilateral, you have to educate the payer on why their denial is wrong. For the denials you received, who was the payer?
Click to expand...
There have been multiple but Blue Cross and a couple Medicaid products. Thank you for your explanation. I had not found a DX code and we have been appealing these denials but I just wanted to see if there was something out there to help combat the denials.
 
0
podcoder70 said:
Hello there!
We bill 29799 bilateral for the casting whether it is manual or digital. Not all payers cover it, but many do. Then at the time of dispense, bill out the L3000 RT, L3000 LT. With the exception of Medicare, which does not cover custom orthotics.
Click to expand...
Hi, this is the documentation for when the patient is scanned for their custom orthotics at our office:

"Patient would benefit from custom orthotics. Due to the unique foot structure the patient, a custom orthotic will intimately contour and contact the foot aiding in support of the foot and prevent pathologic motion. This will allow the patient to ambulate for longer distances and prevent pain due to the pathologic motion. With this, the patient will be able to perform activities of daily living in an improved fashion without pain.
Patient was scanned today for custom orthoses with the Forward Motion 3-D mapping software. A full 3-D image was obtained with all necessary structures in full view.
The necessary adjustments to the orthosis will be applied to the orthosis based on the patient's structural and biomechanical deformity. Patient was instructed on the appropriate wear-in protocol and respective time period to allow the feet to adjust to the orthotics.
Informed the patient that the orthotic would be made for her foot by the company. They will send the orthotic to us within 2-3 weeks. At this time, the patient will be informed that the orthotics are ready for pickup. Instructed patient to make a follow-up appointment at that time for 4 weeks. At this time, we will assess the patient's the effectiveness of the orthotic and adjusted as necessary."

Would I be able to bill for the 29799/S0395 during this encounter or is this bundled into the L3000? Also, What percentage would I calculate for the fees for the scanning?

Thank you!
 
0
kle0204 said:
Hi, this is the documentation for when the patient is scanned for their custom orthotics at our office:

"Patient would benefit from custom orthotics. Due to the unique foot structure the patient, a custom orthotic will intimately contour and contact the foot aiding in support of the foot and prevent pathologic motion. This will allow the patient to ambulate for longer distances and prevent pain due to the pathologic motion. With this, the patient will be able to perform activities of daily living in an improved fashion without pain.
Patient was scanned today for custom orthoses with the Forward Motion 3-D mapping software. A full 3-D image was obtained with all necessary structures in full view.
The necessary adjustments to the orthosis will be applied to the orthosis based on the patient's structural and biomechanical deformity. Patient was instructed on the appropriate wear-in protocol and respective time period to allow the feet to adjust to the orthotics.
Informed the patient that the orthotic would be made for her foot by the company. They will send the orthotic to us within 2-3 weeks. At this time, the patient will be informed that the orthotics are ready for pickup. Instructed patient to make a follow-up appointment at that time for 4 weeks. At this time, we will assess the patient's the effectiveness of the orthotic and adjusted as necessary."

Would I be able to bill for the 29799/S0395 during this encounter or is this bundled into the L3000? Also, What percentage would I calculate for the fees for the scanning?

Thank you!
Click to expand...
That is more than enough documentation to code for 29799 RT and 29799 LT. Not all payers will cover this code. Eventually, you will develop a list of those that do and those that dont. For those that dont, you will adjust the balance denied. The amount you charge is up to you. Be sure the description is in box 19. Most payers want the casting coded on the day of casting and L3000 on day of dispense.
 
0
podcoder70 said:
That is more than enough documentation to code for 29799 RT and 29799 LT. Not all payers will cover this code. Eventually, you will develop a list of those that do and those that dont. For those that dont, you will adjust the balance denied. The amount you charge is up to you. Be sure the description is in box 19. Most payers want the casting coded on the day of casting and L3000 on day of dispense.
Click to expand...
You have made my day! lol Thank you so so much!
 
0
Hello, I found this forum and I am also confused about orthotic billing.
I know how we are billing incorrectly because from what I can find out it is currently by payer. Currently the codes we use are:

L3010(HCPCS code L3010 for Foot, insert, removable, molded to patient model, longitudinal arch support, each as maintained by CMS falls under Foot Inserts, Removable.)- Commercial/Medicare Advantage

L3020(HCPCS Code L3020 for Foot, insert, removable, molded to patient model, longitudinal/ metatarsal support,)- Commercial/Medicare Advantage

L3000 (Foot, insert, removable, molded to patient model, 'UCB' type, Berkeley Shell,)- Medicaid plans

It seems common for L3000 to be billed more than we are billing it but maybe we do ours different? We currently use Earthwalk for casting and we do not usually do anything with the heel cup sizes on the order form and from what I can find online L3000 is not supported without a heel cup of 10mm or more. We do manual fiberglass casting and send them in for processing.

Also, would anyone be willing to share how you are properly documenting for these codes? If anyone would like to help us out we are starting to get audited for DME and we are looking for guidance. We lost out CPC, so we currently do not have anyone inhouse to help with these questions.
 
0
atraywick@ffhcia.com said:
Hello, I found this forum and I am also confused about orthotic billing.
I know how we are billing incorrectly because from what I can find out it is currently by payer. Currently the codes we use are:

L3010(HCPCS code L3010 for Foot, insert, removable, molded to patient model, longitudinal arch support, each as maintained by CMS falls under Foot Inserts, Removable.)- Commercial/Medicare Advantage

L3020(HCPCS Code L3020 for Foot, insert, removable, molded to patient model, longitudinal/ metatarsal support,)- Commercial/Medicare Advantage

L3000 (Foot, insert, removable, molded to patient model, 'UCB' type, Berkeley Shell,)- Medicaid plans

It seems common for L3000 to be billed more than we are billing it but maybe we do ours different? We currently use Earthwalk for casting and we do not usually do anything with the heel cup sizes on the order form and from what I can find online L3000 is not supported without a heel cup of 10mm or more. We do manual fiberglass casting and send them in for processing.

Also, would anyone be willing to share how you are properly documenting for these codes? If anyone would like to help us out we are starting to get audited for DME and we are looking for guidance. We lost out CPC, so we currently do not have anyone inhouse to help with these questions.
Click to expand...
feel free to PM me, podcoder1@gmail.com
 
You must log in or register to reply here.
Top