Orthopedic Coding Alert

Coding 29805, 29806, 29807, 29819? Here’s what you need to know.

Your orthopedic surgeon performs a knee arthroscopy but does several procedures. One thing is for certain: you’ll need to understand the multiple-scope rule to determine which procedures you can actually claim — and get paid for.

Important orthopedic exception: Keep in mind that the multiple-scope rule applies mainly to shoulder and knee procedures in the orthopedic practice, but it also affects those of the elbow, wrist and hip. On the other hand, it does not apply to ankle or metacarpophalangeal (MCP) arthroscopy, and it doesn’t affect arthroscopically aided procedures (29851, 29855-29856, 29888-29889 and 29892). In addition, some surgical knee arthroscopies are excluded from the family — specifically, 29866-29868.

Follow these expert-approved tips to clinch your coding every time.

1. Look to CPT® for Scope ‘Families’

Before worrying about how to apply the multiple-endoscopy rule, you must first know why and when it applies.

The multiple-endoscopy rule is Medicare’s method to avoid paying twice (or more) for “inclusive” services by reimbursing only a portion of any scope performed at the same time as another scope of the same basic type.

Here’s how the rule works: CPT^® divides groups of similar codes into so-called “families.” The first code (the base or “parent” code) describes the basic procedure. Following the base code, CPT^® lists any variants that “go beyond” (are more extensive than) the base code, says Marvel J. Hammer, RN, CPC, CCS-P, ACS-PM, CHCO, owner of MJH Consulting in Denver, Colo. For example, consider this partial code family:

• 29805 — Arthroscopy, shoulder, diagnostic, with or without synovial biopsy (separate procedure)
• 29806 — Arthroscopy, shoulder, surgical; capsulorrhaphy
• 29807 — ... repair of SLAP lesion
• 29819 — ... with removal of loose body or foreign body.

In this case, 29806, 29807 and 29819 describe more extensive procedures than the family’s base code, 29805, which they are listed under in CPT^®. In other words, 29806, 29807 and 29819 include all the work involved in 29805, plus something more.

The multiple-scope rule applies only if two or more endoscopies the surgeon performs are members of the same code family. If the surgeon performs 29806 and 29807 during the same operative session, for instance, the multiple-scope rule applies. But if he performs a shoulder arthroscopy 29807 and a scope from a different code family, such as knee arthroscopy (for example, 29870, Arthroscopy, knee, diagnostic, with or without synovial biopsy [separate procedure]), you need not worry about the multiple-scope rule.

In addition, you should not use modifier 51 (Multiple procedures) when the multiplescope rule applies.

2. Always Include the ‘Base’ Procedure

Let’s assume that the physician has performed a diagnostic shoulder arthroscopy (29805) plus shoulder arthroscopy for repair of SLAP lesion (29807). How does the multiple-scope rule apply?

Remember: Family codes always include the work involved in the base code, and a surgical scope always includes the diagnostic scope of the same type, Conklin says. Therefore, you would report only 29807 in this case.

What about diagnostic shoulder arthroscopy followed by arthroscopic limited debridement? Once again, you should report only the more extensive procedure — in this case, 29822 (Arthroscopy, shoulder, surgical; debridement, limited).

3. No Base Procedure? Bill Both Scopes

If the surgeon performs two scopes in the same family, neither of which is the base procedure, you should report both codes. Therefore, if your orthopedist performs shoulder arthroscopy with foreign-body removal (29819) followed by shoulder arthroscopy for complete synovectomy, you would submit both 29819 and 29821 (... synovectomy, complete).

Watch for CCI bundles: In some cases, the national Correct Coding Initiative (CCI) will impose additional bundles on arthroscopic procedures that fall outside the multiple-scope rule. As just one example, arthroscopic shoulder debridements (29822 and 29823) bundle arthroscopic foreign-body removal (29819) and partial synovectomy (29820) in the same shoulder.

As a second example, CCI bundles many arthroscopic knee procedures, including removal of loose or foreign body (29874), limited synovectomy (29875), debridement (29877) and lysis of adhesions (29884), into surgical knee arthroscopy with lateral release (29873).

Best bet: Before you submit a multiple-arthroscopy claim, check it against CCI edits to be sure you haven’t overcoded.

4. Watch Your Reimbursement

Under the multiple-scope rule, Medicare will pay the entire fee schedule amount only for the highest-valued scope in a given code family during the same operative session. Medicare carriers will reimburse any additional scopes in the same family by subtracting the value of the base scope in that family and paying the difference.

The oil-change analogy: If this seems confusing, look at it another way. You take your car for service at the local dealer and see a sign reading:

• Package 1: Oil change — $15
• Package 2: Oil change and tire rotation — $25
• Package 3: Oil change and replace wiper blades $30

You order Package 3 and ask to have the tires rotated in addition. But you would not want to pay a full $25 for Package 2 in addition to the $30 for Package 3. Why pay for the oil change twice?

Rather, you would expect to pay the $30 for Package 3 plus the difference between the cost of an oil change alone and the cost of an oil change with tire rotation, for a total of $40 ($30 for oil change and new wipers + [$25 for oil change and tire rotation - $15 for the cost of the "extra" oil change] = $40).

The situation works the same way when payers determine reimbursement for endoscopies. Because every endoscope in a given code family includes the "base" procedure, why pay for that portion of each procedure more than once?

For example: The surgeon performs knee arthroscopy with lateral release (29873) followed by arthroscopic medial and lateral meniscectomy (29880).

Medicare and other payers that follow Medicare guidelines will reimburse the full value of the more extensive procedure (in this case, 29880 with 7.39 work relative value units, based on the 2016 National Medicare Physician Fee Schedule Relative Value File), plus the value of the second scope minus the value of the base procedure (29873 has 6.24 work RVUs, from which you must subtract the 5.19 work RVUs allotted for the family “base” code, 29870: 6.24-5.19 = 1.05 RVUs). Total payment for both scopes in this case would equal 8.44 RVUs (7.39 +1.05).

Check private payers: “Although Medicare uses this rule to lessen the value of subsequent codes, it does not then lower their value by 50 percent or 25 percent as private payers do,” says Bill Mallon, MD, former medical director at Emerge Orthopaedics in Durham, N.C. Most private payers use a different system in which they reduce the second procedure by 50 percent and third and some subsequent procedures to 25 percent of the accepted fee, he adds. Multiple subsequent procedures will often not be reimbursed by private payers.