Oncology & Hematology Coding Alert

Report separate codes for the vaccine supply as well as administration.

Code choices for influenza vaccines increase every flu season, so coding for flu vaccinations can be daunting. But if you look at route of administration, strains of influenza the vaccine is effective against, age of the patient, and presence of preservatives, you’ll navigate your way to the right vaccine code choice.

Tip 1: Capture Vaccine Strains to Initiate Code Choice

The first thing you will need to look at is the number of strains of influenza virus the vaccine will protect the patient from. Vaccines that protect against three strains are called trivalent, and vaccines that protect against four strains are called quadrivalent. Although most of the vaccines that were available until now protected the patient from two strains of Influenza A (H1N1 and H3N2) and one strain of Influenza B (trivalent), you now have newer vaccines protecting the patient from four strains of influenza, namely two strains of influenza A and two strains of influenza B (quadrivalent).

Action: So, when looking at the product label, you will have to look at terms like “trivalent” and “quadrivalent” that will help you in narrowing down your code choice and assist you to choose the appropriate code.

Reminder: Many of the available influenza vaccines such as Fluzone and Flulaval, which were only available as “trivalent” vaccines earlier, are now available in the quadrivalent series also. So, it is best to check the product label or check with your physician to see which form of the vaccine he used to avoid making costly mistakes in coding.

Tip 2: Look at Route of Vaccine Administration

While most of the code choices that you have for flu vaccine coding are for intramuscular or other injected forms of the vaccine, new vaccines in spray form brought in a few more choices. So, if your physician is using an influenza vaccine such as FluMist in the form of a spray, you’ll select from either 90660 (Influenza virus vaccine, trivalent, live, for intranasal use) or 90672 (Influenza virus vaccine, quadrivalent, live, for intranasal use), depending on the number of strains that the vaccine will protect the patient from.

Note: The administration code also will vary by route of the administration. For example, if the vaccine is provided by the intranasal route without counseling, you will look to 90473 (Immunization administration by intranasal or oral route; 1 vaccine [single or combination vaccine/toxoid]) and +90474 (…each additional vaccine [single or combination vaccine/toxoid) (List separately in addition to code for primary procedure]) for each additional vaccine/toxoid the physician provides by the intranasal or oral route in the same session.

“By comparison, if the administration without counseling is percutaneous, intradermal, subcutaneous, or intramuscular, then you will report 90471 (Immunization administration [includes percutaneous, intradermal, subcutaneous, or intramuscular injections]; 1 vaccine [single or combination vaccine/toxoid]) and +90472 (. . . each additional vaccine [single or combination vaccine/toxoid] [List separately in addition to code for primary procedure]),” notes Kent Moore, senior strategist for physician payment at the American Academy of Family Physicians.

However, the administration code will remain the same, regardless of the route, in a situation when the vaccination along with counseling is provided to a patient 18 years of age or younger (90460, Immunization administration through 18 years of age via any route of administration, with counseling by physician or other qualified health care professional; first or only component of each vaccine or toxoid administered). Add +90461 (…each additional vaccine or toxoid component administered (List separately in addition to code for primary procedure]) for each additional vaccine or toxoid component when the physician provides more than one vaccination with counseling.

Tip 3: Check Age of the Patient for Injected Vaccines

You do not have different age-related code choices for intranasal vaccines, but you’ll need to know the patient’s age to accurately assign injected forms of the vaccine.

For each type of influenza vaccine, you have two code choices depending on the age of the patient: one for ages between six months and 35 months and another for ages three years and above. “For instance, code 90657 is for ‘Influenza virus vaccine, trivalent, split virus, when administered to children 6-35 months of age, for intramuscular use,” Moore points out. “The corresponding code for individuals three years of age and older is 90658 (Influenza virus vaccine, trivalent, split virus, when administered to individuals 3 years of age and older, for intramuscular use).”

Tip 4: Determine If the Vaccine Was Preservative-Free or Not

Next, you’ll look at whether or not the vaccine contains any preservatives. Some of the clues are in the product label, such as constituents like “thimerosol.” If this is present in the product, then the product contains a preservative. Products without a preservative are considered “preservative-free.”

“The trivalent, split virus influenza virus vaccines described by 90657 and 90658 above are considered to include preservative, since the phrase ‘preservative-free’ is not included in the descriptors,” Moore observes. The corresponding codes for preservative-free, trivalent, split virus influenza vaccine are 90655 (Influenza virus vaccine, trivalent, split virus, preservative free, when administered to children 6-35 months of age, for intramuscular use) and 90656 (Influenza virus vaccine, trivalent, split virus, preservative free, when administered to individuals 3 years and older, for intramuscular use).

Caveat: Most of the commercially available flu vaccines come in “single-use” doses and “multi-dose” packs. Some of the vaccines that you use might be preservative free when your physician is using a single-dose pack, while the multi-dose pack with the same brand name might contain preservatives. So, look at the product label for preservatives, or else you might end up reporting the wrong code.

Example: Your physician provides a dose of Fluzone intramuscularly to an elderly patient. The product label shows a 0.5 mL single dose pack was used. The product label also shows the product used is a trivalent, split virus inactivated influenza virus vaccine for intramuscular use. Also, the product is preservative free and does not contain any thimerosol. Your physician provided counseling regarding the uses of the vaccine and discussed adverse effects.

What to report: You report code 90658 (Influenza virus vaccine, trivalent, split virus, when administered to individuals 3 years of age and older, for intramuscular use) for a trivalent split virus vaccine administered intramuscularly.

Tip 5: Look at Vaccine Brand for Medicare Patients

If your physician is providing the influenza vaccine to a Medicare patient, you will have to look specifically into the brand of vaccine. The reason is the codes you use for supply may be different depending on the vaccine used. So when reporting the vaccine for Medicare patients, you can also choose from the following codes:

• Q2034 -- Influenza virus vaccine, split virus, for intramuscular use (Agriflu)
• Q2035 -- Influenza virus vaccine, split virus, when administered to individuals 3 years of age and older, for intramuscular use [Afluria]
• Q2036 -- …[Flulaval]
• Q2037 -- …[Fluvirin]
• Q2038 -- …[Fluzone]
• Q2039 -- …[not otherwise specified]

“You also need to remember that the influenza administration code is different for Medicare,” Moore adds. “Specifically, you should report G0008 (Administration of influenza virus vaccine) when billing Medicare.”